Airsoft Canada - View Single Post

kospauste · October 16th, 2017, 22:51

Had a very strange thing happen to me when I took my VFC M4 out tonight. I accidentally touched the reverse contacts and the gun clicked and locked up, unable to fire. I reset the anti-reversal latch which was locked up, but the gun is still unresponsive. It is a Deans conversion and when I opened up the stock tube, I noticed that the tech who performed the conversion removed the fuse capsule. It does have a MOSFET built in. A quick check with a multimeter shows voltage coming from the battery, but not coming off the motor leads. Is it possible I have burned out the MOSFET or the motor? Can anyone recommend a competent AEG gunsmith who will not cost me a fortune?

October 16th, 2017, 22:51	#1
kospauste Trader rating Join Date: Jul 2012	VFC AEG not firing. Had a very strange thing happen to me when I took my VFC M4 out tonight. I accidentally touched the reverse contacts and the gun clicked and locked up, unable to fire. I reset the anti-reversal latch which was locked up, but the gun is still unresponsive. It is a Deans conversion and when I opened up the stock tube, I noticed that the tech who performed the conversion removed the fuse capsule. It does have a MOSFET built in. A quick check with a multimeter shows voltage coming from the battery, but not coming off the motor leads. Is it possible I have burned out the MOSFET or the motor? Can anyone recommend a competent AEG gunsmith who will not cost me a fortune?