Airsoft Canada - View Single Post - KJ P226 CO2 (KP-01)

sherminator · May 20th, 2017, 14:25

Hello airsoft community,

I have a brand new KJ works P226 CO2 (KP-01). All brand new.

It shoots gas inconsistently. Accuracy and hop-up all over the place. I have tested in 15 - 25 Celcius Temp. Seems to make no difference. I can feel the inconsistency in the slide recoil. I have used silicone oil on all the parts. Dry racked the slide hundreds of times, trying to break in the parts. I have a green gas mag and a C02 mag; both of which have the same issue. Sometimes the gas doesn't have enough pressure to cycle the next BB into the chamber. FPS is about 200 - 280 with green gas. 300 - 400 with C02.

I had the retailer rebuild the hop-up and I am waiting to see if it made a difference.

Any ideas as to what could be going on? Any ideas what I can do?

Thank you
Sherminator

May 20th, 2017, 14:25	#1
sherminator Trader rating Join Date: Oct 2003	KJ P226 CO2 (KP-01) - Gas issues Hello airsoft community, I have a brand new KJ works P226 CO2 (KP-01). All brand new. It shoots gas inconsistently. Accuracy and hop-up all over the place. I have tested in 15 - 25 Celcius Temp. Seems to make no difference. I can feel the inconsistency in the slide recoil. I have used silicone oil on all the parts. Dry racked the slide hundreds of times, trying to break in the parts. I have a green gas mag and a C02 mag; both of which have the same issue. Sometimes the gas doesn't have enough pressure to cycle the next BB into the chamber. FPS is about 200 - 280 with green gas. 300 - 400 with C02. I had the retailer rebuild the hop-up and I am waiting to see if it made a difference. Any ideas as to what could be going on? Any ideas what I can do? Thank you Sherminator