Airsoft Canada - View Single Post - G&G G980 SE (Kar98k - Shell Ejecting)

Zfurlong · April 18th, 2017, 20:01

Shell ejectors wont last. The air seal isnt where it should be resulting in large velocity fluctuations, shells get damaged all the time and aare NOT cheap to replace, proprietary hop, little to no after market internal parts. For this reason, i recommend ditching it and getting a straight mag fed gas gun if you are that dead set on gas guns. Id recommend a g96 (g&g) instead as its based on the kjw m700 system, is easy to maintain, and there are already parts available for it.

April 18th, 2017, 20:01	#8
Zfurlong Trader rating Join Date: Sep 2014 Location: Oromocto	Shell ejectors wont last. The air seal isnt where it should be resulting in large velocity fluctuations, shells get damaged all the time and aare NOT cheap to replace, proprietary hop, little to no after market internal parts. For this reason, i recommend ditching it and getting a straight mag fed gas gun if you are that dead set on gas guns. Id recommend a g96 (g&g) instead as its based on the kjw m700 system, is easy to maintain, and there are already parts available for it. __________________ current armament: mk43, ump.45, p90, barret, m14, g33, k98, m4 tac, m4 swat, mp5 navy, vsr10, p226, m9.