View Single Post
Old January 14th, 2017, 18:26   #1
riley_A
 
Join Date: Jul 2016
Location: Calgary, AB
More kjw m9 problems

So I'm having an issue with my kjw m9 and mags where when I insert the mags and rack the slide, the slide doesnt fully return fully into battery which is resulting in the gun firing improperly. I've narrowed the problem down to it being caused by the mag gasket which seals with the nozzle. I have several mags that work properly and several that dont work properly and upon comparing the gaskets between mags, the non working seals appear to be a good mil or two taller than the gaskets on the working mags which results in the nozzle catching on the gasket in several stages of the slide cycling.
I tried installing new kjw gaskets however those also caused the same issues.
I'm thinking that I either need new shorter gaskets, or I need to find a way to shorten the existing gaskets, however im not sure where I would be able to find a shorter gasket specific to the m9, and shortening the gaskets wouldnt be easy.

Any insight is greatly appreciated
riley_A is offline   Reply With Quote