Quote:
Originally Posted by Drakker
1) Different mags can have different FPS, it depends on the output valve they have installed. Some valves have larger opening and let out more gas.
2) You should check the mag alignment, to make sure it is the same as the short mag. You can look through the breech and see where it sits. If they sit the same and there is no wobble, then it might be a problem with the valve on the long mag, or with your valve knocker, but if its the valve knocker, you'd probably be having issues with the short mag too. Make sure your part #57 still has the tab that keeps the mag aligned, sometime this tab breaks and mags will not sit properly. Shorts mags will fit better because of the bottom plate that prevents them going up too far, but its not the case with the long mags that will go up all the way.
|
Sorry for the late replay been spending the weekend eliminating different factors
1) i see 100% what you mean its annoying but i noticed that the new valve i installed is the same for all my mags. However for the original TM mag the valve knocker hits harder and gives more power and kick, but on the extended mag it does not hit as hard and the valve sticks out a bit more then the Stock tm mag wiht the same valve.
Question is - i see that you can screw in and out the middle part of the mag valve a bit, does that do anything? does it help the valve to stay open longer for more power ?
also i need to find a way to have the mag valve on the extend mag screw in further like the Stock mag as it is pushing against the valve knocker pushing the hammer back a bit, i think this is effecting how hard the valve knocker hits.
2) as for part #57 i don't see where that part is... lol ... on the diagram it says its the grip...... but using your logic it help me eliminate the issue of the extended mag not firing!!! i eliminated the valve knocker as your were right.
correct me if i am wrong but is it the leaf spring???? as i adjust it a bit here and there (pain in the a$$) and it eliminates the problem. However, it does not work 100% of the time
i would shoot a few round and then suddenly out of no where the pistol goes full auto and when it stop it goes back to normal then when shooting it then would randomly go back to full auto this happens like 20% of the time ... but 20% is alot
am i going at thins all wrong or am i getting closer and closer?