Airsoft Canada - View Single Post - Realistic sound reduction expectations with Sorbo Pad

ao_tenshi · July 3rd, 2015, 18:14

Thanks for all the suggests everyone!

So to summarize below are some of the key components needed to achieve a quiet effect, along with what I currently have installed.

1) Silencer - 5.5" aluminum silencer installed
2) Cylinder Head - stock KWA
3) Piston Head - Modify Polycarbonate
4) Piston - stock KWA (AOE applied)
5) Sorbo Pad - Scatterplot Sorbo Pad v2 D70 3/16"
6) Gears - stock KWA
7) Motor - stock KWA

Will also look at swiss-cheese the piston, but not looking at swapping gears or motor at the moment.
Any suggestion on a good Cylinder Head? (hopefully KWA cylinder head is not proprietary).

July 3rd, 2015, 18:14	#13
ao_tenshi Trader rating Join Date: Apr 2011 Location: Toronto, Ontario	Thanks for all the suggests everyone! So to summarize below are some of the key components needed to achieve a quiet effect, along with what I currently have installed. 1) Silencer - 5.5" aluminum silencer installed 2) Cylinder Head - stock KWA 3) Piston Head - Modify Polycarbonate 4) Piston - stock KWA (AOE applied) 5) Sorbo Pad - Scatterplot Sorbo Pad v2 D70 3/16" 6) Gears - stock KWA 7) Motor - stock KWA Will also look at swiss-cheese the piston, but not looking at swapping gears or motor at the moment. Any suggestion on a good Cylinder Head? (hopefully KWA cylinder head is not proprietary). Last edited by ao_tenshi; July 3rd, 2015 at 18:19..