[boony]

No it comes intact, theres a couple metal pins that hold it together like an AEG gear box, but surprisingly no screws, you simple pull the whole thing apart and the glue holding it together breaks. The piece I got took absolutely no force to break apart, gonna glue it together more semi-permanently after my modifications. Just borrowed a Dremel from my buddy lol



^@nikotin

Yeah I forgot to mention in my posts about the Hogue stock that you need a metric 160mm (at least) long bolt.
I ordered a 150mm from Boltdepot, still was just a tad too short. The way I did mine was shim the inside of the hollow surround of the bolt with lots of random spacers that embedded themselves in the stock tight as I progressively kept tightening my 150mm metric bolt. It's just as solid as a normal bolt would be. Glad you got yours installed nicely!



Edit:

Got it on, after many hours of chaos trying to get this damn thing to just fit. Too hard to even attempt, I do not suggest anyone to get this and do the modding. At the end of the whole procedure I realized I should've centered the handguard more to the tube itself. Right now the tube's rear slightly protrudes passed the back of this handguard. Can't fix this unless I cut more and plastic weld pieces to keep the tube in place.

I personally don't think it looks as good as the stock CAM870SF foreend, set up as in my last post. But finally the shotgun has reached the end of its journey lol.