|
I was basically checking which wire was positive and which was negative by putting the stripped wires into a a battery with female deans connector. I did not solder the charger wires while it was pluged in. My first two batteries had touched wires so i thought they were fried, i then bought 2 new 9.6 volt 1600 mah batteries. The wires did not touch but it had pretty much the same results as the two that had crossed wires. I do not have a voltage meter. I was charging the batteries with the charger that came with the gun. I am pretty sure the gun came with a smart charger it has the green and red lights to tell if it is charging or not. The charging current is 500 mA
|