Airsoft Canada - View Single Post - Noveske NSR 13.5" Keymod rail from Airsoftstore.ca

chaz · January 30th, 2015, 20:41

Can you confirm which side is the correct side for the VFC upper as both fit almost exactly the same. I simply went with the one that fit snuggly.
I also took out the bottom 2 screws and the rail lined up like your pictures above. I am wondering if simply putting a couple washers between the rail and the barrel nut on the bottom would be enough to keep the rail from going crazy? I don't want you to send me a new rail if I can simply tweak the rail to work.

January 30th, 2015, 20:41	#18
chaz Trader rating Join Date: Jan 2006 Location: Ajax	Can you confirm which side is the correct side for the VFC upper as both fit almost exactly the same. I simply went with the one that fit snuggly. I also took out the bottom 2 screws and the rail lined up like your pictures above. I am wondering if simply putting a couple washers between the rail and the barrel nut on the bottom would be enough to keep the rail from going crazy? I don't want you to send me a new rail if I can simply tweak the rail to work. Last edited by chaz; January 30th, 2015 at 20:46..