Airsoft Canada - View Single Post - Question: Inner Barrel Upgrade for KP-05

ardo · December 4th, 2014, 10:21

I used .28g for a while, now using .30g (Red Devil? don't like it, gives me occasional flyers), and have a bottle of .32g to try next.

I did another test last night, reasonably slow fire, 10 rounds at 6m. With two flyers, the group size is 25mm. Discarding those two, the group is 10mm wide & 20mm high. This is from stock KP-05.

Is it an OK assumption that a good hop up rubber may improve the vertical spread?

I am quite happy with the pistol, just wanted to get a slight improvement, not to build a race gun. Not having flyers would mean a lot to me. When shooting a 4in plate rack from 5-7m, I would know that a miss was because I did something wrong, not the gun.

I may as well try a Mad Bull 6.03 with an A+ hop up rubber, it's under $40 anyway.

December 4th, 2014, 10:21	#12
ardo Trader rating Join Date: Feb 2011 Location: Toronto	I used .28g for a while, now using .30g (Red Devil? don't like it, gives me occasional flyers), and have a bottle of .32g to try next. I did another test last night, reasonably slow fire, 10 rounds at 6m. With two flyers, the group size is 25mm. Discarding those two, the group is 10mm wide & 20mm high. This is from stock KP-05. Is it an OK assumption that a good hop up rubber may improve the vertical spread? I am quite happy with the pistol, just wanted to get a slight improvement, not to build a race gun. Not having flyers would mean a lot to me. When shooting a 4in plate rack from 5-7m, I would know that a miss was because I did something wrong, not the gun. I may as well try a Mad Bull 6.03 with an A+ hop up rubber, it's under $40 anyway.