|
how old is this aeg? how many rounds would you say you've put through it in semi in it's lifetime?
What battery are you using? stock motor? stock gears? what spring?
The easy one to try is the cutoff lever needs replacement.
the harder one is that if the cutoff is not the issue, the trigger gate is holding the shuttle too tightly and requires several hits from the cutoff lever to knock it loose.
If it wasn't doing it previously and nothing in the configuration has changed (motor/battery/gears/spring) then the logical one is the cutoff lever needs replacement.
__________________
I futz with V2s, V3s and V6s. I could be wrong... but probably, most likely not, as far as I know.
|