Quote:
Originally Posted by Off_kilter
Things holding it on
-set screw
-antirotation pin like on most Aks
-glue
I suggest you do it up FSB style
Asura dynamics is in the process of making most of these parts
....
|
As far as I'm concerned, most of the screws and pins are out, the problem is the glue now....
As for the gun, I was thinking something more simplistic, i.e. ....
This is actually what I am trying to go for.
Quote:
Originally Posted by MooseHead92
Yes, yes, and yes. That thing ain't leaving without some convincing on your part.
First, remove any grub screw that might be clamping down on the barrel threads.Next up, bring some water to a boil, and dip the orange tip in there (preferably with the barrel&hopup assembly out of the gun... don't need hot steam on your bucking & nub). Let it soak for a few mikes then grab a pair of pliers and gently wrench that shit right off.
I had an E1 as my first gun, too. I know the pain lol.
|
Really hope I won't screw it up... Thanks for tips. If anything, I'll just visit the tech at TA, pretty sure they can handle this.