Airsoft Canada - View Single Post

Rabbit · May 11th, 2014, 14:20

Ive run into this issue twice now - both working on lonex gearboxes.

Full auto fires perfectly, safety works just fine - semi fires once and what appears to be a full cycle but the trigger locks however; if I push the trigger forward after its single cycle I can fire again. After each trigger pull in semi I do have to push the trigger forward.

All tests done in the receiver.

My knowledge leads me to believe most semi issues are related to the cut off lever - im currently using a zci v2 lever and have also tried a stock dboys that I had on hand.

I am using a blue shs v2 switch assembly..I have also read about fitment issues with this particular brand of switch.

Thoughts?

May 11th, 2014, 14:20	#1
Rabbit formerly FrankieCees, Remylebeau Trader rating Join Date: May 2010 Location: Hamilton	Cut off lever or switch assembly? Ive run into this issue twice now - both working on lonex gearboxes. Full auto fires perfectly, safety works just fine - semi fires once and what appears to be a full cycle but the trigger locks however; if I push the trigger forward after its single cycle I can fire again. After each trigger pull in semi I do have to push the trigger forward. All tests done in the receiver. My knowledge leads me to believe most semi issues are related to the cut off lever - im currently using a zci v2 lever and have also tried a stock dboys that I had on hand. I am using a blue shs v2 switch assembly..I have also read about fitment issues with this particular brand of switch. Thoughts?