Airsoft Canada - View Single Post

DYORD · March 30th, 2014, 22:56

It's been a while since I last fired it (6 years). Never had those issues before.

I'm pretty sure it's not a magazine issue. Because it won't even fire even upside down.

I just replaced the hopup rubber, installed 6.02 tight barrel, everything else is upgraded for a SP150 spring. The only thing that is stock is the tappet plate. I thought the original is more rigid than after market ones.

If it's the tappet plate, I don't get it why is it flexing upwards? Though I can't see the inside during a cycle, the gearbox has a guide rail (all the way to the sector gear) that should always put it in place. I might be wrong though.

As far as I know, the nozzle is not pulling backwards enough to feed a bb.

Btw: Here's my setup
TM Steyr AUG
Systema SP150
CA metal hopup bucking
CA Airtight nozzle
STU gears
Deepfire metal spring guide
Deepfire metal half teeth piston
Guarder metal cylinder head
(Stock) TM type 0 cylinder head
(Stock) TM piston head
(Stock) TM Tappet plate

I haven't played since 2008. I guess it adds to that. I'm still not looking for airtight issues. I still want to solve this misfeeds first.

March 30th, 2014, 22:56	#4
DYORD Trader rating Join Date: Jan 2007 Location: Philippines	It's been a while since I last fired it (6 years). Never had those issues before. I'm pretty sure it's not a magazine issue. Because it won't even fire even upside down. I just replaced the hopup rubber, installed 6.02 tight barrel, everything else is upgraded for a SP150 spring. The only thing that is stock is the tappet plate. I thought the original is more rigid than after market ones. If it's the tappet plate, I don't get it why is it flexing upwards? Though I can't see the inside during a cycle, the gearbox has a guide rail (all the way to the sector gear) that should always put it in place. I might be wrong though. As far as I know, the nozzle is not pulling backwards enough to feed a bb. Btw: Here's my setup TM Steyr AUG Systema SP150 CA metal hopup bucking CA Airtight nozzle STU gears Deepfire metal spring guide Deepfire metal half teeth piston Guarder metal cylinder head (Stock) TM type 0 cylinder head (Stock) TM piston head (Stock) TM Tappet plate I haven't played since 2008. I guess it adds to that. I'm still not looking for airtight issues. I still want to solve this misfeeds first. __________________ MORE FPS :banghead: