Quote:
Originally Posted by SF_Chewy
I'm using the A+ bucking. At high and low velocities it has worked well for me. I also tend to use .25s and .28s.
Scar aluminum nozzle =/ M4 aluminum nozzle. Different designs so they perhaps put more thought into the Scar nozzle... M4 nozzle is a POS
|
Thanks chewy, I'm also running .25 (bb bastard), and .30 (bioval)
I have the RA aluminium nozzle and RA steel bcg, which is what I'm using to shoot 300-350fps, and it's working pretty well now, but it took a lot of tweaking to get it to work properly. I did the spring swap from the plastic nozzle, but it was the biggest PIA to do. The set screw had so much thread lock on it, that it stripped. So I drilled out the set screw. The rear part that unscrews also was covered in threadlock (end to end, every thread) so that was a super PIA to unscrew. Story goes on, but long story short it works now. And if you're using the aluminium nozzle, you pretty much have to use their steel bcg, because the steel slide rails eat away at the we softer metal. Just from my experience.