Airsoft Canada - View Single Post - Accurate AEG @ 150+ ft with heavier BB's under $500

lurkingknight · March 25th, 2014, 17:27

compression components usually... sometimes barrel.. hopup rubber.

Cylinder head, piston head, nozzle (sometimes) around 40-50$
good hopup rubber like pdi w hold 13$
I roll with prommy barrels, so that's around 70$

spring and piston are irrelevant. Properly tuned compression and hop can lift a BB out to 50-60m Which is beyond your 150ft requirement.

A stock TM pistol using .28s can hit targets at 50m (man sized) reliably. That would make the BB travel probably around 250fps on green gas.

March 25th, 2014, 17:27	#17
lurkingknight "bb bukakke" KING! Trader rating Join Date: Jul 2011 Location: Ottawa	compression components usually... sometimes barrel.. hopup rubber. Cylinder head, piston head, nozzle (sometimes) around 40-50$ good hopup rubber like pdi w hold 13$ I roll with prommy barrels, so that's around 70$ spring and piston are irrelevant. Properly tuned compression and hop can lift a BB out to 50-60m Which is beyond your 150ft requirement. A stock TM pistol using .28s can hit targets at 50m (man sized) reliably. That would make the BB travel probably around 250fps on green gas. __________________ I futz with V2s, V3s and V6s. I could be wrong... but probably, most likely not, as far as I know.