Airsoft Canada - View Single Post

ThunderCactus · February 14th, 2014, 10:41

You're still getting low fps and good compression with the stock piston, right? So it might be a mechbox alignment issue.
Also, does your air nozzle move back and forward freely with the mechbox closed?

You could also take the piston out, and run the gears with the motor to make sure the gear train runs properly.

February 14th, 2014, 10:41	#4
ThunderCactus Not Eye Safe, Pretty Boy Maximus on the field take his picture! Trader rating Join Date: Feb 2007	You're still getting low fps and good compression with the stock piston, right? So it might be a mechbox alignment issue. Also, does your air nozzle move back and forward freely with the mechbox closed? You could also take the piston out, and run the gears with the motor to make sure the gear train runs properly. Last edited by ThunderCactus; February 14th, 2014 at 10:47..