|
I have two lonex g36 hop up chamber in both my ares g36s and they work flawlessly. With one of my ares g36, I did have the same problem like yours, it was double feeding.
If you look at your photos and compare the Ares OEM hop up chamber to the lonex, you can see that there is a slight gap between the gearbox and the lonex hop up. Where as the original ares hop up chamber has no gap and sits flush against the gear box.
To fix this you can add a spacer/o-ring around the front of the inner barrel stabilizer thing (part #F91) (it is the big fat metal piece you stick your hop up and spring into and lock down using a grub screw).
Doing so will set your hop up unit back a little bit and make it flush against your gearbox. This fixed the air seal and feeding issue with mine. I hope this works for you also.
|