Airsoft Canada - View Single Post

lurkingknight · August 30th, 2013, 17:53

I tried fitting the lonex to my CA.. didn't fit.. despite being the same design, the measurements are different.

I filed a bit of the back off.. filed some of the prongs to make it sit back farther... it did not seal at all... 130 fps is about as much as I could get.

I gave up.. .client came to me with broken hopup on his ares, and the ares unit is out of stock currently, so I tried fitting my adjusted lonex into his ares... it seals reasonably well.. adjusted a bit more, but it's having issues feeding, I think more to do with mags being loose in the magwell.

So at this point we're at a bit of an impass, either start modifying his magwell or wait for the ares unit to come back into stock.

August 30th, 2013, 17:53	#43
lurkingknight "bb bukakke" KING! Trader rating Join Date: Jul 2011 Location: Ottawa	I tried fitting the lonex to my CA.. didn't fit.. despite being the same design, the measurements are different. I filed a bit of the back off.. filed some of the prongs to make it sit back farther... it did not seal at all... 130 fps is about as much as I could get. I gave up.. .client came to me with broken hopup on his ares, and the ares unit is out of stock currently, so I tried fitting my adjusted lonex into his ares... it seals reasonably well.. adjusted a bit more, but it's having issues feeding, I think more to do with mags being loose in the magwell. So at this point we're at a bit of an impass, either start modifying his magwell or wait for the ares unit to come back into stock. __________________ I futz with V2s, V3s and V6s. I could be wrong... but probably, most likely not, as far as I know.