Airsoft Canada - View Single Post - Got pwned by Guarder High Output Valve for WA

weslee · August 18th, 2005, 09:36

I have run in to this problem a few times with Guarder valves. Take the valve apart and cut one or two coils off the spring, reassemble and it should be good to go.

*Note* If you cut too much of the spring off the valve will not hold gas.

August 18th, 2005, 09:36	#3
weslee Trader rating Join Date: Aug 2003 Location: Vancouver, BC	I have run in to this problem a few times with Guarder valves. Take the valve apart and cut one or two coils off the spring, reassemble and it should be good to go. Note If you cut too much of the spring off the valve will not hold gas.