|
pretty much everything is compatible, particularly the shooters design valve knocker, which is pretty much the only part of the KJ that breaks.
tightbores and hop rubbers are fine. you can use a TM glock 17 barrel (97mm) and any TM pistol/VSR bucking.
I'm a little wary of replacing outer barrels because for some strange reason, all the manufacturers insist on making aftermarket barrels out of steel when stock slides are pot metal and aftermarket slides are aluminum, thus ensuring that something goes wrong. this goes for almost every other pistol, not just the 226.
if you can source a KJ threaded barrel from a tan/OD version, it would work perfect. (also hook me up please.)
as per usual, parts may require some light sanding to fit, but it's more or less a TM with a metal body kit.
__________________
too busy tinkering to play.
|