|
So in your video you suggested crazy glue-ing the patch to the barrel window. In the barrel I tried it on (madbull 6.03) , what seemed to be the closest fitting patch still raised up slightly when I inserted the round rod shown in the video, thus preventing me from glue-ing both edges. Like the old video showed, I used some silicone to fill in that space and then sanded the top, but I was concerned that the patch may have been lop sided off to one side or the other when I silicone it in place, so when I didn't have good results I got discouraged after my second failed attempt... Any suggestions?
I should note that I did also try sanding the inner channel as per the traditional way, and upon disassembly I noted that the flat hop I was trying was to big for the hop up window. So many variables here. This would also be much easier if I didn't live in the city, and could just go out in my back yard and test it any time I wanted...
|