Quote:
Originally Posted by ThunderCactus
Did you test the mechbox for air seal?
If you have perfect air seal, the piston will not move AT ALL when you test for compression. Make sure the tappet plate is forward too, I've seen leaks of up to 50fps between the air nozzle and cyl head
|
The piston does not move at all. I was having that issue when I tested with a Modify air nozzle, but when I switched to Lonex nozzle and cylinder head the air seal was perfect.
I guess I'll have to just accept that my G36 is abnormally awesome and my M14 is just normal awesome lol.