Airsoft Canada - View Single Post - Need new bucking for Tanfoglio Limited Custom

ardo · March 7th, 2013, 10:48

Thanks, I'll do that. I was only using a diamond carving tip on my Dremel, didn't try sandpaper.

I came across a J-hop discussion, and am wondering if I should try filling the barrel opening with gasket maker or rubber silicone first, then slide the bucking over.

March 7th, 2013, 10:48	#24
ardo Trader rating Join Date: Feb 2011 Location: Toronto	Thanks, I'll do that. I was only using a diamond carving tip on my Dremel, didn't try sandpaper. I came across a J-hop discussion, and am wondering if I should try filling the barrel opening with gasket maker or rubber silicone first, then slide the bucking over.