Quote:
Originally Posted by ardo
Thanks, I meant finding the bucking without a little 'V' on the inside - or maybe shaving it off if none can be found.
Just measured the barrel, it is 94mm long, so just about 10mm shorter than the TM barrel. Do you think it may still work?
I suspect that trying to fit a different bucking is a lot cheaper than fitting a new barrel, so I'll PM you about that. The cheapest Nine ball non-hop I saw was at Airsoft GI, just under $40.
Thanks!
|
94mm long? That's the Hi-Capa 4.3 inner barrel length (94.5mm). I'd recommend going with that barrel instead, then.
Quote:
Originally Posted by ardo
Just a silly question: is barrel length measured without the bucking installed? That's how I measured mine. Tx.
|
That's correct. Without the barrel installed.
