|
sorry, in addition
I can guarantee that part 44 is in there because it came with a new one, as the new sear itself would not fit the old one.
Fitting the sear onto 44 was tricky, and part 44 seemed to be a little loose in the hole that it sat in, and the spring that goes on it took some effort to get on.
The sear usually just falls onto that part, but when installing the 5ku one i had to put a screwdriver thru it and pull it toward the hammer so the clearance between the housing, and the part 44 was big enough to fit the sear...
Maybe i will throw some pictures up
|