Unfortunately I don't live in Canada.
I just ordered my tier one upgrades including a guarder trigger bar and magazine catch, along with another we magazine, which brings my total to 3 we magazines and 2 army.
First thing I did was take a small silicone stray and cut it so that it fits right under the hop up arm diagonally. The ends are cut so that it just makes the nub press down better and there are no protrusions.
I went outside to shoot it, and it didnt work.
Now, I noticed that when I pressed the slide forward all the way, the hop up worked, and worked really well.
When the gun is racked, and when the gun is shooting, the slide never comes forward all the way. Because of this, the hop up isnt working properly and I dont know why. I think it is the air nozzle, because I tried without the outer barrel on and just the slide and it seems like the friction is coming from the air nozzle entering the hop up bucking. It seems like it is a really tight fit and it has trouble getting into it.
Back and side views when the slide is not all the way forward.
Back and side views when the slide is pushed all the way forward.
Suggestions?