Airsoft Canada - View Single Post - RA-Tech WE M4/M16 nozzle

TPM001 · July 22nd, 2012, 22:24

I guess theoretically, we can replace the head piece with the regular NPAS valve. The principle should be the same, as long as you open up the tail piece such that some gas pressure is allowed to build up behind the NPAS valve. This all assumes, of course, that the regular NPAS valve actually fits inside the aluminum nozzle.

I'll give it a try and report back.

July 22nd, 2012, 22:24	#42
TPM001 Trader rating Join Date: May 2011	I guess theoretically, we can replace the head piece with the regular NPAS valve. The principle should be the same, as long as you open up the tail piece such that some gas pressure is allowed to build up behind the NPAS valve. This all assumes, of course, that the regular NPAS valve actually fits inside the aluminum nozzle. I'll give it a try and report back.