Quote:
Originally Posted by phloudernow
most of my guns run a TM EG1000 <--- one of the best motors ever made in my opinion, or a G&Pm120.
|
Don't take this personally but all 3 of the motors you just mentioned are either not great, bad or overpriced.
The EG1000 overheats very quickly and the brushes do not last long. The M120 is overpriced for its mediocre performance and the same goes for the Systema Magnum. I've tried all 3 plus about 10 or more other motors from X High Tech high torque to SHS high torque/speed, G&P M170, M180, Guarder ITU, Lonex Red/Orange, VS Studio, Marui EG3000, 700 and the 1000S, G&P stock, VFC stock, CYMA neo, JG red/blue and some others I don't remember.
Favourite motor right now is the X High Tech motor just because it's so cheap. It does overheat/get quite hot after sustained fire, but the ROF is quite good. Pinion gear is a bit soft but you get what you pay for. This is followed by the Lonex Red which gives better performance and runs a LOT cooler and more efficiently. It's more expensive, but worth the price difference. If money is no object, a TerminusX motor will rape any of the motors above.