Quote:
Originally Posted by Xedilian
Info
|
That is NOT for a dan wesson. That mod is interesting to read, but not for the same gun.
What I did to get my revolver down was to simply replace the metal box in the handle that was supporting the hammer spring arm. Just swapped it out and replaced it with three bolts I bought from Canadian Tire and it shoots consistently at 310 fps with .2's. Adding a washer increases the fps to 355fps so it was over the 350 limit.
This way it is not a permanent no going back mod...at anytime I can stick a washer or two in the handle and go out to a outdoor game with a 400-450 fps revolver, then remove em and go play cqb!