Airsoft Canada - View Single Post

Rusty Lugnuts · June 18th, 2012, 08:52

SO only the spring and motor were changed? You did say that you had parts out checking seals- The answer has to be in the parts that were touched. I say that an o-ring got pinched or maybe the tiny one in the noozle came out. I'm afraid your going to have to start replacing parts one by one untill solved
i have replaced piston heads and lost 30 fps but your talking 100 + fps Thats a lot You did'nt put the cylinder in with the port at the front by accident? How is the rate of fire-unchanged? i guess with changing the motor you can't tell... Does it seem like somethings dragging- i once reassembled mine with the piston not in the grooves and it still worked only kinda dragged.

June 18th, 2012, 08:52	#14
Rusty Lugnuts Fainting Goat, Dictator of Quinte West Trader rating Join Date: Nov 2011 Location: Cobourg Ontario	SO only the spring and motor were changed? You did say that you had parts out checking seals- The answer has to be in the parts that were touched. I say that an o-ring got pinched or maybe the tiny one in the noozle came out. I'm afraid your going to have to start replacing parts one by one untill solved i have replaced piston heads and lost 30 fps but your talking 100 + fps Thats a lot You did'nt put the cylinder in with the port at the front by accident? How is the rate of fire-unchanged? i guess with changing the motor you can't tell... Does it seem like somethings dragging- i once reassembled mine with the piston not in the grooves and it still worked only kinda dragged. Last edited by Rusty Lugnuts; June 18th, 2012 at 08:55..