Airsoft Canada - View Single Post

Spike · May 13th, 2012, 11:47

I got a new Classic Army m4 X series, and it was shooting anywhere from 300-350 out of the box. The spring that was in it when I got it from revolution was not irregular.

I installed a Guarder 110 spring (irregular end to the spring guide), checked the compression (perfect) and airseal in the hop up (also perfect) and now it shoots an incredibly consistent ~200fps, and after about 10 shots it slowly climbs to 220fps and stays consistent there as well.

I swapped the CA motor the minute I fired it as it sounded like a dying cat. I have an EG1000 in there now and I also tried a Matrix 3000, neither helped.

I also tried several voltages of batteries, still no dice. Any ideas?

May 13th, 2012, 11:47	#1
Spike Privateer Airsoft Trader rating Join Date: Dec 2008 Location: Beaverbank, NS	Very low FPS I got a new Classic Army m4 X series, and it was shooting anywhere from 300-350 out of the box. The spring that was in it when I got it from revolution was not irregular. I installed a Guarder 110 spring (irregular end to the spring guide), checked the compression (perfect) and airseal in the hop up (also perfect) and now it shoots an incredibly consistent ~200fps, and after about 10 shots it slowly climbs to 220fps and stays consistent there as well. I swapped the CA motor the minute I fired it as it sounded like a dying cat. I have an EG1000 in there now and I also tried a Matrix 3000, neither helped. I also tried several voltages of batteries, still no dice. Any ideas? __________________ I change primaries like other people change socks.