K so AEG stock into PTW stock;
G&P marine stock has a similar receiver end to an M16 full stock, so no modification was necessary to run wiring into the "buffer stub"
I used a systema full stock buffer stub, turned it down (hobby lathe FTW), shaved the face of the marine stock, straightened it out and drilled/tapped/countersunk a 1/4" screw into the top of the buffer tube to prevent the stock from rotating.
Mounted the board in "backwards" so all the wiring is on one end, just makes it cleaner in there. Still don't have my batteries yet....
And here's the nearly finished UNPAINTED product complete with the "locomotive" elcan specterDR 4x red dot. Still gotta mod and mount my MOE grip
The reason for the tan stock, is because they were out of black, and because it's a high wear area, I'd rather have it fade to FDE than black.
Also if you guys look up pictures, it looks distinctly khaki, but it's actually a very convincing flat dark earth.
