Airsoft Canada - View Single Post - How to field strip/disassemble KSC/KWA/Umarex MP7?

Danke · March 9th, 2012, 01:42

You might have bent the spring, that makes it tougher.

When you took the trigger out you knocked out the pin and then rotated it forward till it dropped free. To re-install it's the exact opposite motion but if the spring is bent you can't get it in the right spot.

March 9th, 2012, 01:42	#6
Danke Prancercise Guru Trader rating Join Date: Oct 2007 Location: Danger Zone	You might have bent the spring, that makes it tougher. When you took the trigger out you knocked out the pin and then rotated it forward till it dropped free. To re-install it's the exact opposite motion but if the spring is bent you can't get it in the right spot. __________________ Airsoft, where nothing is hurt but feelings.