Hi I have a M4 with the following issue. She (it's a girl M4) will shot one time and no followup shot for a couple seconds, Then it will shoot one time again and on and on. I tried 5 different batteries and it acted the same ~maybe a little worse with the 8.4s as compared to the 9.6's. It does this regardless of mag in or out. She has the following internals built by Venture.
• Bravo Version 2 Gearbox
• New Steel Gearset
• Steel Anti Reversal Latch
• New Lonex Premium High Capacity Trigger Mech. Ver. 2
• Trigger Safety Switch
• New Element Type 3 Cylinder
• Version 2 Cylinder Head
• New Full Steel Teeth Rack Piston
• Piston Head
• New Element Perfect Fit 120% Spring
• New Element Steel Trigger
• M4/M16 Selector Plate
• Tokyo Marui Tappet Plate
• Gearbox Spring Set
• New Element Version 2 Cutoff Lever
• New Stainless Steel Version 2 Ball Bearing Spring Guide
• New 2MM Gold Bullet Connectors – 2 sets*
• M4/M16 Airseal Nozzle
• ICS Motor
• New Military Action (MA-Taiwan) SS 6.03 TB Barrel – 363MM
• New CNC Aluminum M4/M16 HopUp Chamber
• New HopUp Bucking and Nub
• New Dean’s Connector
• Labour- Prepared, shimmed and assembled new Version 2
* 2MM Gold bullet connectors installed mid-wire on both positive and negative battery leads. Installed on opposites to be foolproof when connecting in a hurry.
Doesn't matter if the selector is in semi or full auto. I've never had a AEG apart , but i'm going to
and i was just hoping for some ideas that i should look for. Also she seems to be making a different sound now.
Thanks in advance Rusty