Airsoft Canada - View Single Post

Dynamo · November 20th, 2011, 14:45

shimming makes no difference. the holes are simply too close together. my only options so far are to clamp the shells onto my mill and elongate the holes along the axis at which is lines up with the next hole by .013, but then i might run into issues with the sector gear lining up with the piston. or replace the gearbox shells.

November 20th, 2011, 14:45	#7
Dynamo Harvester of Noobs' Sorrow Trader rating Join Date: Oct 2003 Location: T̆͒ͥ̓̿̅̈́̐͊̿͗̐̾̃͐ͧ&#8	shimming makes no difference. the holes are simply too close together. my only options so far are to clamp the shells onto my mill and elongate the holes along the axis at which is lines up with the next hole by .013, but then i might run into issues with the sector gear lining up with the piston. or replace the gearbox shells. __________________ Weapons Technician / Gunsmith Don't look at me, I don't know, lol ¯\(°_o)/¯. Last edited by Dynamo; November 20th, 2011 at 14:53..