Airsoft Canada - View Single Post - new Marui G18 problems, wont' fire properly..

hanepin · November 13th, 2011, 06:27

Fixed the hammer problem somewhat. I put thin paper wrapped in sellotape between the slide and the blow back housing. it makes the housing along with the bump closer to the hammer sear in the frame. now it works most of the time. most since when I fired vertically the slide still wont cycle properly. as if the slide was too heavy despite the 150% recoil spring.

I also did several small sanding along the slide and found few places that seems to be blocking proper path to the nozzle/muzzle on cycle. it seems that SD slide for TM Glock isn't as flawless as I thought.

November 13th, 2011, 06:27	#5
hanepin Trader rating Join Date: Nov 2011	Fixed the hammer problem somewhat. I put thin paper wrapped in sellotape between the slide and the blow back housing. it makes the housing along with the bump closer to the hammer sear in the frame. now it works most of the time. most since when I fired vertically the slide still wont cycle properly. as if the slide was too heavy despite the 150% recoil spring. I also did several small sanding along the slide and found few places that seems to be blocking proper path to the nozzle/muzzle on cycle. it seems that SD slide for TM Glock isn't as flawless as I thought.