|
Due to the heavy metal bolt, duster gas may not be able to cycle the gun properly. Generally duster is used on plastic guns with plastic bolt / slides. You'd have to try it to see if it works in your gun or not.
And as a side note, if you're to use duster, make sure that it's 134A (tetrafluoroethane) gas ONLY. It's a bit harder to locate and more expensive than the commonly available stuff (difluoroethane). Make absolutely sure it's not difluoroethane, as that stuff is corrosive to rubber and will eat the seals in your mag and gun over time.
__________________
|