Quote:
Originally Posted by RacingManiac
A question I just ran into, I got a new "SV" style hammer from ProG4(one with "SV" wire cut into the spur), I am using it on one of my Hi-Capa which originally uses the oval egg shape type hammer. The new hammer looks to have less "thickness" at the portion where it contacts the BBU that cocks the hammer. As a result the slide can't put the hammer into the cocked position and it just gets caught on the return stroke on the back side of the BBU. If I hand cock the hammer you can see that the slide is completely clear of the hammer with no contact. Now all my hammer are quite old and I haven't gotten a new one for a while and I am wondering if they have changed the tolerance or engagement of the sear to the hammer or something. I guess I can always go back to what I was using before, but I wonder if the new gun I build in the future will have the same issue....
|
What receiver are you using? I've seen this happen with a few non-ProG4/AS/IK receivers, but the engagement height of the hammer hook can be adjusted, in any case.
The SV hammers have always engaged a bit lower than other hammer styles, simply due to the shape of the top of the hammer, and not the hooks themselves.
Quote:
Originally Posted by RacingManiac
The only other things I've seen is the lower frame from Airsoft Surgeon, with the square trigger guard....
Whats annoying is that if AS is coming with 1911 lowers, why doesn't ProG4 make the Infinity LDC single stacker already....
|
I believe ProG4 has a new contractual lockout agreement which prevents re-selling AS contracted projects out the back door.