Quote:
Originally Posted by xl1
hi brian, whats the possibility cause if the magazine when insert in, then i cocking the slide it doesn't work.
Only if i cocking the slide first, and then i insert magazine, then its fine
is that because of the knocker or the disconnector?
im using CP slide and frame set 6"
thanks
andy
|
Andy,
For Tokyo Marui Hi-Capa/1911, causes are:
1) Valve knocker is too long. Grind down it's length.
2) Flow valve strike face height is too high. Adjust it lower.
I'm assuming you're talking about Tokyo Marui, but you mention "CP slide & frame set", which as far as I can recall, only manufactured for WA. If you are referring to WA, then unfortunately, I don't know enough about the Magna pistols to be able to comment.
Brian
Quote:
Originally Posted by RJT
I am having problems with a 5KU barrel slide setup. I have the following barrel and slide set below.
http://www.airsoftglobal.com/shop/im...B229S-AG-1.jpg
The problem is the barrel is coming apart when firing. The only part of the barrel that is screwed in is the compensator portion. The other section seems to be only held together by friction. So when I fire it the barrel is coming apart. I even went as far as two part epoxy the barrel together but it seems to break that free also. The only option I see is a set screw or welding it together.
This is my first experience with this type of barrel setup so maybe I am missing something. Any suggestions. |
Yup. Buy a better product, like ILLusion Kinetics. :P Sorry, I won't support 5KU products. If you wish to support a company that tries to directly rip off other company's products (and does a bad job at it), then feel free to bug the retailer you bought it from when you have problems with it.