Airsoft Canada - View Single Post - FAQ for Tokyo Marui Hi-Capa, 2011, 1911, MEU & Detonics type variants

RJT · June 12th, 2011, 13:15

I am having problems with a 5KU barrel slide setup. I have the following barrel and slide set below.

http://www.airsoftglobal.com/shop/im...B229S-AG-1.jpg

The problem is the barrel is coming apart when firing. The only part of the barrel that is screwed in is the compensator portion. The other section seems to be only held together by friction. So when I fire it the barrel is coming apart. I even went as far as two part epoxy the barrel together but it seems to break that free also. The only option I see is a set screw or welding it together.

This is my first experience with this type of barrel setup so maybe I am missing something. Any suggestions.

June 12th, 2011, 13:15	#1150
RJT Trader rating Join Date: Jun 2011 Location: North Carolina	I am having problems with a 5KU barrel slide setup. I have the following barrel and slide set below. http://www.airsoftglobal.com/shop/im...B229S-AG-1.jpg The problem is the barrel is coming apart when firing. The only part of the barrel that is screwed in is the compensator portion. The other section seems to be only held together by friction. So when I fire it the barrel is coming apart. I even went as far as two part epoxy the barrel together but it seems to break that free also. The only option I see is a set screw or welding it together. This is my first experience with this type of barrel setup so maybe I am missing something. Any suggestions. Last edited by RJT; June 13th, 2011 at 01:17..