Airsoft Canada - View Single Post

Ninja_En_Short · June 9th, 2011, 22:12

Myself I completely remove the factory ones, put some silicon seal, let dry a bit so it solidifies then close back, work perfectly so far.
Normally people don't remove the original seals but given their size a non leaking mag is more because of God's will than anything else (and I don't believe in it either).

June 9th, 2011, 22:12	#8
Ninja_En_Short Trader rating Join Date: Jul 2007 Location: France, Canada (Montréal)	Myself I completely remove the factory ones, put some silicon seal, let dry a bit so it solidifies then close back, work perfectly so far. Normally people don't remove the original seals but given their size a non leaking mag is more because of God's will than anything else (and I don't believe in it either). __________________ Tous les jours nous nous endormons plus instruits mais pas forcément moins bêtes... I can do a CTRL+ATL+DEL on your gun ! Gun doc in Montreal on AEG, GBB, GBBR and Bolt rifle (gaz and spring) Heavy custom builder (including painting)