Airsoft Canada - View Single Post

Fiya · June 3rd, 2011, 01:52

I've checked in the motor cage, but it appears that its flat and smooth, not a hex screw. I tried 2 or 3 different metric hex keys to no avail. I may be crazy so I will check again later tonight or tomorrow.

Oh and I used someone elses .2 Bio Bastard BBs I believe. I'm not sure what kind of chrono it was. It was one used to chrono at Claybank.

No some had fallen off while opening the gearbox initially. When I put them back on it may have been in the wrong spots because it was very tight. Gears would not turn by hand when I put the shell back on to test. I spent a good while checking out the alignment and spacing and found a sweet spot where the gears move more freely when testing and keep their place very well.

June 3rd, 2011, 01:52	#4
Fiya Trader rating Join Date: Feb 2008 Location: Regina, Saskatchewan	I've checked in the motor cage, but it appears that its flat and smooth, not a hex screw. I tried 2 or 3 different metric hex keys to no avail. I may be crazy so I will check again later tonight or tomorrow. Oh and I used someone elses .2 Bio Bastard BBs I believe. I'm not sure what kind of chrono it was. It was one used to chrono at Claybank. No some had fallen off while opening the gearbox initially. When I put them back on it may have been in the wrong spots because it was very tight. Gears would not turn by hand when I put the shell back on to test. I spent a good while checking out the alignment and spacing and found a sweet spot where the gears move more freely when testing and keep their place very well. Last edited by Fiya; June 3rd, 2011 at 01:57..