Airsoft Canada - View Single Post

sushicake · May 27th, 2011, 20:09

A glock 18c I see

Thats the return spring for the BBU, there's a little slot on the right side where it goes into. When you have the BBU half way into the slide you need to take a screw driver to compress the plastic nub so it goes into it's slot inside the BBU.

Also when installing the plastic nub faces forward towards the barrel.

And you have the plastic nub on the right way.

Hope this helps.

May 27th, 2011, 20:09	#10
sushicake Trader rating Join Date: Dec 2008 Location: Markham, ON	A glock 18c I see Thats the return spring for the BBU, there's a little slot on the right side where it goes into. When you have the BBU half way into the slide you need to take a screw driver to compress the plastic nub so it goes into it's slot inside the BBU. Also when installing the plastic nub faces forward towards the barrel. And you have the plastic nub on the right way. Hope this helps. __________________ "Don't you know the first law of physics? Anything fun costs atleast $8" Last edited by sushicake; May 27th, 2011 at 20:13..