Airsoft Canada - View Single Post - FAQ for Tokyo Marui Hi-Capa, 2011, 1911, MEU & Detonics type variants

chenmeister · April 29th, 2011, 18:58

I installed an airsoft surgeon loading muzzle and the fit is tight with the nineball dyna piston, it doesn't slide smoothly and blowback feels sluggish. (the dyna piston works fine with the stock loading muzzle and the smaller o-ring with the piston seems to be too small) It shoots correctly but recoils inconsistently at times. Also, I can see white gas coming out of the barrel when shooting blanks, what causes this?
The hammer is also touching the loading muzzle when the slide slides back, they shouldn't be making contact correct? Should I try sanding down the bottom of the loading muzzle?

And wow this airsoft surgeon 170% recoil spring is ridiculously heavy.

April 29th, 2011, 18:58	#1095
chenmeister Trader rating Join Date: Jun 2006 Location: u.s	I installed an airsoft surgeon loading muzzle and the fit is tight with the nineball dyna piston, it doesn't slide smoothly and blowback feels sluggish. (the dyna piston works fine with the stock loading muzzle and the smaller o-ring with the piston seems to be too small) It shoots correctly but recoils inconsistently at times. Also, I can see white gas coming out of the barrel when shooting blanks, what causes this? The hammer is also touching the loading muzzle when the slide slides back, they shouldn't be making contact correct? Should I try sanding down the bottom of the loading muzzle? And wow this airsoft surgeon 170% recoil spring is ridiculously heavy. Last edited by chenmeister; April 30th, 2011 at 00:34..