|
@strike freedom: Mag alignment is not the problem I think. I had another SD nozzle before this (It broke, so I had to replace it with the one I am using) and the old SD nozzle performed flawlessly until it broke. The new one I am using is the one troubling me now. so I am suspecting flawed design or something.
@illusion : Tried that method and still jammed, I guess I was hesitant in applying heat to it, so the bending was not optimal. I would try to bend a bit more tonight.
Would replacing the BBU fix this problem? I am guessing maybe the aftermarket BBU by airsoft surgeon has larger piston's diameter, so the nozzle won't wobble so much.
|