Quote:
Originally Posted by hunghingdailo
I found this on another forum :
here is the link.
And it was mentioned that one of the fix is to file away a part of the magazine where the mag catch will snap to lock the mag once inserted :
I haven't experienced the damage yet... And seeing the pictures he posted scares me off that I was tempted to file either the magazine or the magazine catch.
Reading few posts above regarding the return of loading nozzle, it wasn't a flaw. So, I assume the mag lip and the loading nozzle is supposed to wear for the sake of 'normal' operation / better air seal? |
I think it's because his BBU was loose so the nozzle head end was lower than the back of the BBU, causing the bit on the nozzle that pushes the bb up the feeding ramp to dig into the mag rubber.
It's the same thing that happened with my stock TM mag rubbers. I tightened the bbu screw at the back (the one that's supposed to be the firing pin) and switched my rubbers with the guarder air seal ones and that problem dissappeared.