|
The thing is, im not using an RA TECH NPAS kit. Im using stock air nozzle with RA tech inner barrel.. Sometimes when i disassemble and reassemble the hop up assembly, the gun shoots fine, but most of the time when i reassemble it, it has feeding issues.. maybe 1/6 times it works. Here are the current solutions I have attempted but failed to work:
1. Disassemble and reassemble the hop up unit
2. Removed the hop up rubber and bucking and just installed a naked barrel in the brass tube
3. Thoroughly cleaned the inner barrel and brass tube removing any grease or debris
4. Stretched out the hop up rubber so its not as tight when attached to the inner barrel.
|