Ok here are the shots with their explanation.
I've uploaded these shots with ImageShack so if theres any problems and some people can't see them please suggest a better upload website and I will load them.
So this is my slide without the hammer mechanism, just posted in case someone spots something funny.
http://img101.imageshack.us/i/img2155l.jpg/
This is a photo of what the inside looks like when the hammer is disengaged. Now I noticed something funny, usually when the gun is cocked the trigger is enganged and is centered in the trigger guard. However, when the slide is not on, the trigger is disengaged when the trigger arm ( I don't know what it is called but it connects into the trigger mechanism and resets the trigger when pressed ) is ready.
http://img535.imageshack.us/i/img2157fy.jpg/
This is what my hammer assembly currently looks like (of course that piece and the spring are next to it because I couldn't hold them in place while taking a picture)
http://img715.imageshack.us/i/img2158ux.jpg/
This is the top view of the assembly when the hammer is cocked (remember it doesn't fully uncock, but can be replaced into cocked position)
http://img25.imageshack.us/i/img2161qy.jpg/
A side view to demonstrate how the hammer won't go all the way up
http://img88.imageshack.us/i/img2164l.jpg/
Angled, same thing
http://img545.imageshack.us/i/img2165f.jpg/
This is how I placed my 150% spring on the piece that it goes on....am I doing it wrong?
http://img543.imageshack.us/i/img2166g.jpg/
And this is what it looks like with the original spring ( I seriously don't get why it won't work even with the original spring...its as if taking apart the trigger mechanism renders it unoperable forever)
http://img832.imageshack.us/i/img2167ep.jpg/
I'm sorry for all the url's, it has been a while since I've used an online forum and I don't remember how to get thumbnails and for somereason switching url for img doesn't fix it
If someone reminds me I will edit the post for easier viewing.
Thank you guys so much for any and all help!