Quote:
Originally Posted by T[]RK
Thanks. I can't understand word "nub". It's like "cog"? I better attach a photo...
 |
Neither. The hammer should have also come with a small steel pin that goes in to the hole at the bottom of the hammer. On your picture, it fills the hole that is just to the left of hammer hook "#2". Remove that pin. That location only works with Hi-Capa. It will not function with 1911/MEU type frame.
Quote:
Originally Posted by T[]RK
P.S. Which Hop-Up rubber will your recommend (Firefly, KM (45H or 55H), Nine Ball or other)? And why?
|
Depends what you want to achieve, if you want higher FPS, get Nine Ball. If you want higher accuracy, get Firefly.
BOTH brands will increase both characteristics, but one just does a characteristic better than the other.
The KM ones, I found did not fit well, and I never did much experimentation with it. I'm willing to try them again, but until then, I can not fully comment on it.